HOW WE DO IT (our approach to the design)

AROM S.r.l considers that one of the most important steps of a project development, is the settlement and validation of rational and comprehensive “Design Basis”. This activity is performed, always in strict cooperation with the Client, according the FEED procedure.this allows us to define from the very beginning: the actual nature of the problems to be faced, the Client necessities and requirements, as well as any possible constraints and limitation (legal, economical, technical, logistic, …. and so on). FEED actions are always supported by a survey and are the unique approach that allows the contraction of design times and costs of the entire project (conception and construction phases). After that, the continuous exchange of information, opinions and suggestions with the Customer and our time/partners remains a must for the critical and positive development of the further stages,

from the kick-off meeting up to the successful project conclusion. We usually recommend to test the effectiveness of the selected process and the accuracy of the relative equipment sizing by means of pilot plants, laboratory type or semi-industrial scale, particularly with the resolution of extremely complex issues and always if strictly necessary. AROM S.r.loffers to support the project evolution from the very beginning up to its conclusion (units tested and performing). This continuity constitutes a further guarantee of good quality and the reliability of our services (and plant effectiveness). The quality of our engineering is guaranteed by our know how, settled on more than 20 years of direct, continuous and specific experience.

Some of the technologies by us most commonly used are:
Flocculation Coagulation Elettro-coagulation
Fenton type process Spontaneous sedimentation Accelerated sedimentation
Cyclonic separators API separators Coalescing separators
Emulsions breaking process Pressure filtration/adsorption on sand, multimedia and GAC media
DAF & IAF Stripping with solvents recovery Softening process
Resin process Ultrafiltration Reverse osmosis / EDI
Enhanced oxidation (O3 / H2O2 / UV ...) Desox-denox process Anaerobic digestion and biogas production
Activated sludge process of any kind, nitro-denitro, dephosphatisation, completely mixed or supported biological masses, membranes, ...and so on
sterilization (chemical or by UV) Mechanical dehydration Thermal dehydration and evaporation